How to renew your Professional Engineer license in South Dakota

Your South Dakota Professional Engineer license renews on the anniversary of your license issuance — a 2-year cycle. The CE requirement is 30 CE hours per 2-year cycle. This guide walks the renewal in the order it actually happens — deadline, CE, reporting, payment, and the late path — using only what the record states.

30CE hours per 2-year cycle for professional engineers in South Dakota — renewal deadline: the anniversary of your license issuance — a 2-year cycle.

Track my CE free

The renewal process, in order

1

Know your deadline

Your license renews on the anniversary of your license issuance — a 2-year cycle.

The board’s wording: All professional licenses expire two years after the date of issuance and become invalid unless renewed by that date. A minimum of 30 PDH must be earned during the two-year period immediately preceding the renewal or reinstatement application.

The deadline rule in full →

2

Complete your continuing education

Complete 30 CE hours per 2-year cycle. The requirement names these categories:

  • Technical subjects directly related to the licensee’s professional discipline (minimum 20 of 30) — 20 hrs
  • Professional management subjects such as ethics, business practices, or quality management (maximum 10 of 30) — 10 hrs

Named mandates inside this requirement have their own pages: Ethics

The category breakdown in full →

3

Report and keep your proof

The record describes reporting this way: PDH log submitted in PDF format with the renewal application (emailed to the Board), certified under penalty of perjury; if selected for audit, supporting documentation must be submitted within 30 calendar days of notification.

On audits, the record says: PDH log submitted with renewal, certified under penalty of perjury; audit supporting documents due within 30 calendar days of notification.

CECourse stores the certificates you upload in an audit-ready vault organized by license, counts them against your categories and total as you confirm them, and reminds you at 90, 60, 30, and 7 days before your deadline.

4

File your renewal and pay

Renewal is filed with the board — the record’s source for this requirement is linked in the toolkit below.

Renewal fee
$80

The record’s fee note: ARSD 20:38:33:04 sets $80 biennially for an individual active-status license; ARSD 20:38:33:05 sets a $100 late renewal penalty for individual licenses.

5

If you renew late

What the record says about late renewal: Licenses not renewed by the expiration date become invalid. Late renewal carries a $100 penalty (ARSD 20:38:33:05); reinstatement within three years of expiration costs $180 (SDCL 36-18A-42). The PDH log must be certified under penalty of perjury; practicing without a valid license is a violation of the licensure statute.

Late fee on record: $100.

Good to know

30 PDH per biennial period; at least 20 technical hours and no more than 10 professional-management hours. A third party reports a maximum 15 PDH carryforward, not verified against official sources in this pass. [Continuing education measured in PDH.]

Questions professional engineers ask about renewing

How do I renew my Professional Engineer license in South Dakota?

The renewal runs in this order: your deadline is the anniversary of your license issuance — a 2-year cycle; complete 30 CE hours; then file and pay with the board. The steps on this page follow that order, and every figure in them comes from the record.

When is the renewal deadline for a Professional Engineer in South Dakota?

The deadline is the anniversary of your license issuance — a 2-year cycle. The board’s own wording is quoted in step 1 of this guide.

How many CE hours do professional engineers need in South Dakota?

30 CE hours per 2-year cycle. The named categories inside that total are listed in step 2.

How much does it cost to renew a Professional Engineer license in South Dakota?

The renewal fee is $80. The late fee is $100. The record’s fee note is quoted in step 4.

What happens if I renew my Professional Engineer license late in South Dakota?

The late path for this license is spelled out in step 5 of this guide, in the record’s own words. The late fee on record is $100.

How do I prove my CE if the board audits me?

Keep the certificate itself — course title, your name, the date, and the provider. CECourse stores the originals you upload in an audit-ready vault organized by license, so your proof for every category is retrievable in one place instead of scattered across email and provider portals.

⚠️Board rules change. Every state requirement on CECourse links to its official board source — verify your figures there before relying on them.

Renewal is a process. Track the pieces in one place.

Add your license and CECourse loads your exact requirement — deadline, categories, and total — then counts every certificate you upload against it.

Track my CE free